Tools & Brushes

Products In This Category

Displaying products 91 - 120 of 351 results
Page 4 of 12 Page moveprev1...23456...12movenext
$6.29
Get way down inside a piece without marking up the walls. The special hardware attaching the sponge protects your piece and can easily hold your favorite sponge in place. Made from hardwood and 14" in length.
$15.29
Patterned from the Japanese egote, this tool aids shaping and compressing deep, narrow necked wheel thrown pieces. Made of fine hardwood that is polished to a satin finish, this "comfortably fitting" throwing stick is 12-1/2" in length.
$14.39
Patterned from the Japanese egote, this tool aids shaping and compressing deep, narrow necked wheel thrown pieces. Made of fine hardwood that is polished to a satin finish, this "comfortably fitting" throwing stick is 12-1/2" in length.
$19.99
Handheld detail extrusion tool. With this you can force soft clay through various shaped openings in an assortment of 19 interchangeable discs. The barrel is 0.7 inch diameter and 3.5" long.
$4.99
Set of 19 interchangeable replacement discs for the Kemper K45 Klay Gun handheld detail extrusion tool.
$9.75
Blank die disks for the Kemper Industrial Klay Extruder Gun (IKEG) - comes with 3 blank disks. Custom drill your own shape. You can use a regular drill tool on these aluminum disks.
$10.09
Used to support beads, rings and many other small articles during kiln firing. Approximately 11" long, the Ceramic Bead Bars are designed with a special, high temperature alloy. Support properly. Approx 0.15" dia.
$4.75
For small cones. Holding pyrometric cones in the correct position is the way to obtain the most accurate indication of proper firing. Heat resistant wire gives these holders long life and durability. Five holders in each package.
$5.65
For large cones. Holding pyrometric cones in the correct position is the way to obtain the most accurate indication of proper firing. Heat resistant wire gives these holders long life and durability. Five holders in each package.
$4.40
Hold loose kiln elements in place with these easy to insert, sharp-ended pins. These 1.25" pins are of a heat resistant alloy for temperatures to 2500° F (Cone 13). 12 per package.
$5.29
Hold loose kiln elements in place with these easy to insert, sharp-ended staples. These 1.5" pins are of a heat resistant alloy for temperatures to 2500° F (Cone 13). 12 per package.
$4.55
Used for any projects that require wire support in the high temperatures of ceramic kilns such as jewelry and small armatures. This 24 gauge high temperature steel wire contains no nickel and can be fired up to cone 5. Approximately 10 ft. long.
$7.39
17 gauge high temperature steel wire. Used for any projects that require wire support in the high temperatures of ceramic kilns such as bottle sagging, bead supports, special stilts, element pins, kiln furniture, and cone holders.
$13.99
6" wide. Remove pottery items from the throwing wheel easily and without damage. Lifts are made from rust-free, high-strength aircraft aluminum alloy, and come in pairs.
$11.89
5" wide. Remove pottery items from the throwing wheel easily and without damage. Lifts are made from rust-free, high-strength aircraft aluminum alloy, and come in pairs.
$11.19
4" wide. Remove pottery items from the throwing wheel easily and without damage. Lifts are made from rust-free, high-strength aircraft aluminum alloy, and come in pairs.
$9.65
Makes the creation of new decoration patterns and varied effects possible. Difficult to obtain details such as feathers, plant details, petals, and scales are easily done with spoons contoured for easy insertion, lifting and removal from moist clay.
$6.65
The large end can be used to clean large hole and vase openings; and the small end for small, delicate areas in greenware - such as openings in figurines, teacup handles, and lace patterns. This brush can even be used to clean other brushes.
$5.29
Used after cleaning to dust greenware and restore detail. This oval shaped brush has soft hair that is firmly set in a hardwood handle. Approximately 1.0" wide large head, 9.0" long.
$3.59
Rather than the point you find on the end of a needle tool, this stylus has a small ball on each end (.045 and .072 in diameter). Used in many applications, from detail work to dots to signatures to sgraffito. Approximately 5.5" long.
$3.59
Rather than the point you find on the end of a needle tool, this stylus has a small ball on each end (.030 and .045 in diameter). Used in many applications, from detail work to dots to signatures to sgraffito. Approximately 5.5" long.
$5.49
Easily carve small and miniature details. The steel blades are formed and precision ground to a sharp point 0.057" wide head, approximately 5" long.
$4.69
Easily carve small and miniature details. The steel blades are formed and precision ground to a sharp point. 0.030" wide, approximately 5" long.
$6.69
Ideal for enlarging holes that have become filled with glaze or cutting through difficult surfaces such as glaze, bisque, and tile. The remarkably tough steel rod is coated with Tungsten Carbide particles and set firmly in a hardwood handle.
$3.95
The blades on this cleanup tool are made from high quality stainless steel with a double edge for ordinary and intricate cleanup jobs. Approximately 6" long.
$4.29
The stainless steel spearhead was designed to provide sharp smooth cuts for incising, excising, widening, and deepening detail work. The stainless steel forked-end twin-line works well for hairlines, wood grain and basket weave sgraffito effects.
$4.85
These special blades will cut in any direction that pressure is applied. The high carbon steel saw is firmly set into a hardwood handle. Approximately 5" long. Approximately 1/64" diameter.
$5.19
These special blades will cut in any direction that pressure is applied. The high carbon steel saw is firmly set into a hardwood handle. Used for cutting out designs in thick-walled greenware. Approximately 5" long. Approximately 1/32" diameter.
$5.29
Used to make cutout designs in greenware, this tool is best suited for straight lines. The carbide steel saw is firmly set into a hardwood handle. Approximately 5.25" long.
$4.99
This tool makes the right size hole in greenware salt and pepper shakers. Double-ended, it has high carbon steel drills firmly set in a hardwood handle. Approximately 6.25" long.
Page 4 of 12 Page moveprev1...23456...12movenext