Designed and produced by Peter Callas. Measures approximately 6.875" long.
|
2 oz. bottle with a Purple 16 gauge 1" tip and a "T" cleaning needle, Pink 18 gauge and Yellow 20 gauge 1/2" tips with Grey fine tip cleaning wire, and one tip cover -- great for glaze or slip trailing.
|
1 oz. bottle available with no tip at all (great for small scale slip trailing).
|
1 oz. bottle available with one each of the four different metal tips. Tip sizes come in Extra Fine (0.3mm), Fine (0.5mm), Medium (0.7mm), and Bold (0.9mm).
|
A variety of detailing options for the Laguna Precision Trailing Bottles. Tip sizes come in either Extra Fine (0.3mm), Fine (0.5mm), Medium (0.7mm), or Bold (0.9mm) sizes.
|
One each of the four different metal tips. A variety of detailing options for the Laguna Precision Trailing Bottles. Tip sizes come in Extra Fine (0.3mm), Fine (0.5mm), Medium (0.7mm), and Bold (0.9mm) sizes.
|
Used to flow casting slips, glazes and engobes onto ceramic pieces in raised decorative designs. Lightweight and squeezable, yet still durable; comes with a round spout, a ribbon spout, and caps for both. 4 oz. capacity.
|
Heavy-duty aluminum adjustable slicer (4 1/2" W x 6" L) with replaceable steel wire cutter. Used to cut from 1/16" to 5/8" thickness by 3 and 7/8" wide slices. DO NOT STORE IN WATER, KEEP DRY.
|
7.5" x 10.5" cutting area to cut multiple slabs from a block of clay. 24 Stainless-steel wires. 3/8" slab thickness.
|
Perfect for assisting with measuring out dry clay or glaze ingredients. Bowl Size 4.75" x 2.375". Made of die cast aluminum, polished inside and outside for easy cleaning.
|
Perfect for assisting with measuring out dry clay or glaze ingredients. Bowl Size 6.25" x 3.125". Made of die cast aluminum, polished inside and outside for easy cleaning.
|
Perfect for assisting with measuring out dry clay or glaze ingredients. Bowl Size 8" x 4". Made of die cast aluminum, polished inside and outside for easy cleaning.
|
Take the guesswork out of sizing lids for your pots. One tool is all you need. Simply insert the narrow end of Lid Master into the pot, and the wide end automatically becomes a sizing guide. The Standard size has an 11" capacity.
|
Take the guesswork out of sizing lids for your pots. One tool is all you need. Simply insert the narrow end of Lid Master into the pot, and the wide end automatically becomes a sizing guide. The Large size has an 20" capacity.
|
A re-centering and holding tool for leather-hard or bisque ware. Designed specifically for trimming, it works equally well with waxing the foot or banding with under glazes or engobes.
|
A smaller re-centering and holding tool for leather-hard or bisque ware. Designed specifically for trimming, it works equally well with waxing the foot or banding with under glazes or engobes.
|
Sets of 3. 3", 4", 5" or 6" rods. Used to hold your centered piece in place.
|
Four (4) 2" High Holders; accessory for the Bailey Quick-Trim II. Includes foam pads and rubber covers. Allows you to hold larger forms on the Quick-Trim II.
|
Four (4) 3" High Holders; accessory for the Bailey Quick-Trim II. Includes foam pads and rubber covers. Allows you to hold larger forms on the Quick-Trim II.
|
Four (4) 4" High Holders; accessory for the Bailey Quick-Trim II. Includes foam pads and rubber covers. Allows you to hold larger forms on the Quick-Trim II.
|
Four (4) 6" High Holders; accessory for the Bailey Quick-Trim II. Includes foam pads and rubber covers. Allows you to hold larger forms on the Quick-Trim II.
|
A centering device and holding tool for leather-hard or bisque ware. Designed for re-centering, trimming or decorating ceramic ware.
|
Works for both glaze and slip. 0 - 70 baume or 1.000 - 2.000 gravity. 11.5" long. Measures the approximate specific gravity of liquids.
|
(0.25" diameter blade) The M-10 Round Loop Tool is part of the Dolan Tools "M" Series Miniature Sculpting Tools; an excellent detailing tool made of hardened razor steel and firmly set in a hardwood handle and brass ferrule with industrial adhesive.
|
(0.5"x0.1" blade) Made of hardened razor steel and firmly set in a hardwood handle and brass ferrule with industrial adhesive. Originally designed for carving and sgraffito, many use these tools for delicate and intricate trimming.
|
(0.45" dia. blade) Made of hardened razor steel and firmly set in a hardwood handle and brass ferrule with industrial adhesive. Originally designed for modeling and sculpture, many use these tools for trimming hard to reach places.
|
(0.4"x0.43" blade) Made of hardened razor steel and firmly set in a hardwood handle and brass ferrule with industrial adhesive. Originally designed for modeling and sculpture, many use these tools for trimming hard to reach places.
|
(0.4"x0.43" blade) Made of hardened razor steel and firmly set in a hardwood handle and brass ferrule with industrial adhesive. Originally designed for modeling and sculpture, many use these tools for trimming hard to reach places.
|
(1.92"x1.25" blade) Made of medium gauge hardened and tempered high carbon steel set in a hardwood handle with industrial adhesive and brass ferrule. Excellent for trimming, slicing and making facets of different shapes.
|
(1.45"x1.95" blade) Made of medium gauge hardened and tempered high carbon steel set in a hardwood handle with industrial adhesive and brass ferrule. Excellent for trimming, slicing and making facets of different shapes.
|