|
|
Stilts, Bead Racks, & Ceramic Rods
Products In This Category
Bar stilts. Each stilt measures approximately 3-1/2" point to point and has 10 pins. Sold in sets of 12.
|
Bar stilts. Each stilt measures approximately 3-1/2" point to point and has 20 pins. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 5/16" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 9/16" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 5/8" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 1" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 1-3/8" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 1-3/4" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 2-1/4" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 2-1/2" point to point and 3/8" high. Sold in sets of 12.
|
#4x6 Steel Multipoint Stilts. Sold in sets of 12.
|
For use up to Cone 01, Speedy Spurs outlast all other stilting devices. They are amazingly strong, sturdy, indefinitely re-usable, and eliminate unsightly stilt scars. Only one size is required to support small ware.
|
Setter for beads, buttons, trinkets, etc. Length is 4”, height is 2”. Comes with four 6” rods. Maximum recommended firing range: 2250° F.
|
Two durable stoneware supports with 10" long wires, provide a versatile, space-saving device for firing macrame beads and other larger hanging objects. Base is 3.25" x 1.5"; 6.5" H and uprights are 2" W x 5/16" thick.
|
This block is made of aloxite, a fine, hard abrasive material. Excellent for grinding glaze runs and rough spots on both glazes and bisque ware. 200 mesh, 80 grit, K grade. 2"x 4"x 3/4"
|
After firing, remove unsightly stilt marks with this Aloxite Stilt Mark Stone. In seconds, you can gently and easily remove stilt marks with these slender 4" long, 3/8" x 3/8" bar. 200 mesh, 80 grit, K grade.
|
This block is made of aloxite, a fine, hard abrasive material. Excellent for grinding glaze runs and rough spots on both glazes and bisque ware. 200 mesh, 80 grit, K grade. 2"x 2.5"x 1"
|
A fluted, silicon carbide brick 8" long, 2" x 2" square bar. Very effective at cleaning glaze drips and excessive build up of kiln wash from kiln shelves.
|
A fluted, silicon carbide brick 6" long, 3" x 1" bar. Very effective at cleaning glaze drips and excessive build up of kiln wash from kiln shelves.
|
Used to support beads, rings and many other small articles during kiln firing. Approximately 11" long, the Ceramic Bead Bars are designed with a special, high temperature alloy. Support properly. Approx 0.15" dia.
|
|
|