A 1-1/2"x1-1/2" square post used to support kiln shelves when firing. Measures approximately 6" long. Recommended for firing up to Cone 5.
|
A 1-1/2"x1-1/2" square post used to support kiln shelves when firing. Measures approximately 8" long. Recommended for firing up to Cone 5.
|
A 1-1/2"x1-1/2" square post used to support kiln shelves when firing. Measures approximately 10" long. Recommended for firing up to Cone 5.
|
A 2"x2" square post used to support kiln shelves when firing. Measures approximately 1" long. Recommended for firing up to Cone 10.
|
A 2"x2" square post used to support kiln shelves when firing. Measures approximately 2" long. Recommended for firing up to Cone 10.
|
A 2"x2" square post used to support kiln shelves when firing. Measures approximately 3" long. Recommended for firing up to Cone 10.
|
A 2"x2" square post used to support kiln shelves when firing. Measures approximately 4" long. Recommended for firing up to Cone 10.
|
A 2"x2" square post used to support kiln shelves when firing. Measures approximately 5" long. Recommended for firing up to Cone 10.
|
A 2"x2" square post used to support kiln shelves when firing. Measures approximately 6" long. Recommended for firing up to Cone 10.
|
A 2"x2" square post used to support kiln shelves when firing. Measures approximately 8" long. Recommended for firing up to Cone 10.
|
A 2"x2" square post used to support kiln shelves when firing. Measures approximately 10" long. Recommended for firing up to Cone 10.
|
 A 11"x28" rectangular shelf designed for rectangular kilns. Measures approximately 1/2" thick. Note: Additional 5% Packing Fee for shelves shipped by freight carriers or a 20% Packing Fee for shelves shipped by UPS.
|
A 13"x26" rectangular shelf designed for rectangular kilns. Measures approximately 1/2" thick. Note: Additional 5% Packing Fee for shelves shipped by freight carriers or a 20% Packing Fee for shelves shipped by UPS.
|
A 14"x28" rectangular shelf designed for rectangular kilns. Measures approximately 1/2" thick. Note: Additional 5% Packing Fee for shelves shipped by freight carriers or a 20% Packing Fee for shelves shipped by UPS.
|
Unique plate rack enables the potter to fire from 1 to 6 plates in a stacking arrangement. Strong, sturdy and easy to use. Fire up to cone 5 only. Set of 3. Each piece measures approx 2.6"x2.6"x1.3"
|
Stackable and interlocking tile holders support the corners of your tiles and save space in your kiln. Accommodate any size tile. Requires 4 holders per tile. Fire to Cone 5-6. (Set of 4)
|
Tile holders support the sides of your tiles and save space in your kiln. Tile stand is designed to hold up to 5 tiles, vertically or horizontally. Fire up to Cone 10. 4"x2"x2"(Set of 4). 0.625 in. space between slots.
|
Bar stilts. Each stilt measures approximately 3-1/2" point to point and has 10 pins. Sold in sets of 12.
|
Bar stilts. Each stilt measures approximately 3-1/2" point to point and has 20 pins. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 5/16" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 9/16" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 5/8" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 1" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 1-3/8" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 1-3/4" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 2-1/4" point to point and 3/8" high. Sold in sets of 12.
|
Star stilts. Each stilt measures approximately 2-1/2" point to point and 3/8" high. Sold in sets of 12.
|
#4x6 Steel Multipoint Stilts. Sold in sets of 12.
|
Setter for beads, buttons, trinkets, etc. Length is 4”, height is 2”. Comes with four 6” rods. Maximum recommended firing range: 2250° F.
|
Two durable stoneware supports with 10" long wires, provide a versatile, space-saving device for firing macrame beads and other larger hanging objects. Base is 3.25" x 1.5"; 6.5" H and uprights are 2" W x 5/16" thick.
|