Lockerbie EK Motor Assisted Kick Wheel

Model EK, the motor assisted kick wheel with an optional reversing switch, is driven by a heavy-duty 1/3 hp motor with a rubber friction drive. When the drive is disengaged the wheel will operate as a manual kick wheel. To use the drive, simply depress the foot pedal to engage the rubber drive against the edge of the flywheel. Speed range is 0-157 RPM. The wheel is whisper quiet, controlled with a switch conveniently located at the edge of the work table and has enough power to center 50 lbs. of clay.

Shipping Weight: 307.00 lbs
Shipping Crate Dimensions: 40" x 48" x 36"

Features of Lockerbie Kick Wheels:

• Overall Size: 36" x 42" x 30"
• Frame: Steel pipe and angle iron, welded into a rigid tripod unit. The edge of the flywheel is completely shielded by heavy steel bands. Finished in light gray enamel.
• Flywheel: Reinforced concrete flywheel with a textured surface to provide positive traction for kicking. 27.5" diameter and 89 pounds.
• Work Table: Made of heavy gauge aluminum and reinforced to support up to 200 lbs. Large enough to hold bucket, clay and tools.
• Bearings: Chosen for smooth operation. Under the flywheel is a tapered, roller bearing protected by a 3" shield.
• Seat: Made from red oak.
• Splash Pan: Included on both models.
• Wheelhead: 13" diameter.
• Motor: (on motorized model only) 1/3 hp 120 volt capacitor start. Engaged by foot pedal which makes motorized model adaptable for use either as kick or power wheel.

* Note: Add $90 Crating Fee per Kick Wheel shipped.
Please allow 2-4 months for shipping.

Lockerbie Care Document for Model EK (PDF)

**Note: For large or heavy orders that weigh 150 lbs. or more, we will advise you of the approximate freight cost. You will not be charged until we verify shipping costs with you.**