L&L Model e23T-3 Electric Kiln [SHIPS MFG]

Inside Width (inches)	Inside Height (inches)	Cu. Ft.	Cone / Max Temp	Amps 1 Phase	Amps 240/208 3 Phase	Volts	Watts 240/208 1 Phase	Watts 240/208 3 Phase	Breaker Req. 1 Phase	Breaker Req. 3 Phase
22-3/8	27	6.7	10/2350°F	48.0	27.7/30.5	240/208	11,520/9,980	11,520/11,000	60	40

Ship Wt. Lbs.	Built with 3" Brick	Furniture Kit	Add'l Wt. w/Kit Lbs.
360	Yes	2 full shelves, 4 half shelves, 6 ea - 1/2, 1, 2, 4, 6, 8 inch square posts, insulated gloves, 5 lbs. of cone 10 kiln wash	95

The e23T-3 is 7 cubic feet—a good choice for small high school programs or studio artists. It has 3" brick and plenty of power to get to cone 6 with no problems time and again.

L&L Easy-Fire e23T-3 Kiln Features:

Dyna-Glow hard ceramic element holders 24-Key DynaTrol control with 4 Easy-Fire ceramic programs Zone control is standard Protected Thermocouples Spring-loaded hinges with no support bars to get in the way of loading Piggy-backed cooled panels Sectional construction for easy set-up and moving Heavy-Duty Aluminized Stand Includes 50 amp power cords—no extra charge for 3 phase c-MET-us listed to UL499 Standards Three Year Limited Warranty with technical and customer service support second to none

Quad Element System option
The Quad Element System provides a massively robust element for long life under production conditions. The Quad element system provides four wraps of elements in one 9" high section. When coupled with L&L's element holder which transmits heat, and the fact that the element outside diameter is almost a full 1/2" - this is argueably the best element on the market for top-loading kilns. It has been used in L&L's JH Series kilns for several years now - and under the rigorous conditions of high temperature crystalline glaze firing - element life of over 130 firings with standard A-1 alloy have been normal.

**Note: For large or heavy orders that weigh 150 lbs. we will advise you of the approximate freight cost. You will not be charged until we verify shipping costs with you.**