Rather than the point you find on the end of a needle tool, this stylus has a small ball on each end (.045 and .072 in diameter). Used in many applications, from detail work to dots to signatures to sgraffito. Approximately 5.5" long.
|
Rather than the point you find on the end of a needle tool, this stylus has a small ball on each end (.030 and .045 in diameter). Used in many applications, from detail work to dots to signatures to sgraffito. Approximately 5.5" long.
|
Easily carve small and miniature details. The steel blades are formed and precision ground to a sharp point 0.057" wide head, approximately 5" long.
|
Easily carve small and miniature details. The steel blades are formed and precision ground to a sharp point. 0.030" wide, approximately 5" long.
|
Ideal for enlarging holes that have become filled with glaze or cutting through difficult surfaces such as glaze, bisque, and tile. The remarkably tough steel rod is coated with Tungsten Carbide particles and set firmly in a hardwood handle.
|
The blades on this cleanup tool are made from high quality stainless steel with a double edge for ordinary and intricate cleanup jobs. Approximately 6" long.
|
The stainless steel spearhead was designed to provide sharp smooth cuts for incising, excising, widening, and deepening detail work. The stainless steel forked-end twin-line works well for hairlines, wood grain and basket weave sgraffito effects.
|
These special blades will cut in any direction that pressure is applied. The high carbon steel saw is firmly set into a hardwood handle. Approximately 5" long. Approximately 1/64" diameter.
|
These special blades will cut in any direction that pressure is applied. The high carbon steel saw is firmly set into a hardwood handle. Used for cutting out designs in thick-walled greenware. Approximately 5" long. Approximately 1/32" diameter.
|
Used to make cutout designs in greenware, this tool is best suited for straight lines. The carbide steel saw is firmly set into a hardwood handle. Approximately 5.25" long.
|
This tool makes the right size hole in greenware salt and pepper shakers. Double-ended, it has high carbon steel drills firmly set in a hardwood handle. Approximately 6.25" long.
|
This tool is designed to twirl between the palms of the hands and the round looks rapidly agitate and mix paints, stains, and glazes in the bottle. These galvanized steel loops are firmly set in a hardwood handle for a total length of 6-1/4".
|
Wire loops on each end of this tool provide a method of sgraffito in which variations of line width can be made within a single stroke.
|
Not only erases your mistakes on non-porous surfaces but also is wonderful for wiping excess medium, highlighting areas, and shading. Oil, water color, acrylic and china paint will not hurt these specialized rubber tips.
|
This very small and delicate wire is used for incising and creating various size furrows and detailing small areas. The size of this tool makes it a perfect fit for small detail work. Approximately 6" long.
|
Approximately 1.0" wide head, 6.0" long. This brush can give you a fine spray or cool blobs of paint on your favorite project.
|
The stiff, course bristles are designed for use on hard greenware. The brush is made with stainless steel wires firmly set in a hardwood handle. Approximately 0.5" wide head, 6.5" long. Click here for
|
The bristles are not quite as stiff as the dry texture brush (DG1), and are great for use on soft, damp greenware or clay. The brush is made with stainless steel wires firmly set in a hardwood handle. Approximately 0.5" wide head, 6.5" long.
|
A 1-15/16" thin heat treated needle set into a wooden handle for making clean smooth cuts with a minimal amount of drag when removing the uneven top edge of thrown ceramic forms. Approximately 5.75" long.
|
Cut through and remove the uneven top edge of wheel thrown ceramic pieces. The 1-15/16" thin heat treated needle is set into a 1/2" diameter hardwood handle for a sturdy grip. Approximately 4.75" long.
|
Used to cut heavy clay strips, designs, and holes. A sharp steel needle firmly set in a textured aluminum handle to allow for a firm grip. Approximately 6.75" long.
|
This tool provides an easy method for cutting clean holes in wet thick-wall greenware and wet clay. Sharp, polished brass cutting tube set into a hardwood handle. 3/16" diameter, approximately 5" long.
|
This tool provides an easy method for cutting clean holes in wet thick-wall greenware and wet clay. Sharp, polished brass cutting tube set into a hardwood handle. 1/4" diameter, approximately 5-1/3" long.
|
This tool provides an easy method for cutting clean holes in wet thick-wall greenware and wet clay. Sharp, polished brass cutting tube set into a hardwood handle. 5/16" diameter, approximately 5-1/3" long.
|
This tool provides an easy method for cutting clean holes in wet thick-wall greenware and wet clay. Sharp, polished brass cutting tube with a rubber tip on one end for comfort. 1/2" diameter, approximately 6-1/2" long.
|
This tool provides an easy method for cutting clean holes in wet thick-wall greenware and wet clay. Sharp, polished brass cutting tube with a rubber tip on one end for comfort. 7/8" diameter, approximately 6-1/2" long.
|
Excellent for cutting potpourri holes, Christmas tree holes and more. The tubes have spring loaded aluminum rods which eject the clay. Made with brass tubes set in a hardwood handle. 3/16" diameter, approximately 4-1/2" long.
|
Excellent for cutting potpourri holes, Christmas tree holes and more. The tubes have spring loaded aluminum rods which eject the clay. Made with brass tubes set in a hardwood handle. 1/4" diameter, approximately 4-1/2" long.
|
Made of high quality brass. Designed with push out plunger to remove clay from tube. Ideal for cutting out windows or for other designs. 3/32" diameter, approximately 4" long.
|
Made of high quality brass. Designed with push out plunger to remove clay from tube. Ideal for cutting out windows or for other designs. 1/8" diameter, approximately 4" long.
|