|
|
Hand & Drill Glaze Mixers
Products In This Category
Classic design to help prevent lumps from forming when mixing glazes. 10 inches long. Made of 18/8 Stainless steel.
|
The Hanson Plunge Mixer is a top of the line heavy-duty mixer. Recommended for up to 2 gallon, head diameter of 2.25" with an overall length of 13.25" and a shaft diameter of 5/16".
|
The Hanson Plunge Mixer is a top of the line heavy-duty mixer. Recommended for 3 to 5 gallons, head diameter of 3.19" with an overall length of 17" and a shaft diameter of 5/16".
|
The Hanson Plunge Mixer is a top of the line heavy-duty mixer. Recommended for 5 to 55 gallons, head diameter of 5.88" with an overall length of 23.5" and a shaft diameter of 1/2".
|
Made of Stainless Steel 304. No splashing, no sucking air, and fast mixing cuts time up to 90%. Operated within 450-700 rpms will give the best rate of thorough mixing. Great for glazes, slips, plaster, and many other substances. 2x2x12
|
Made of Stainless Steel 304. No splashing, no sucking air, and fast mixing cuts time up to 90%. Operated within 450-700 rpms will give the best rate of thorough mixing. Great for glazes, slips, plaster, and many other substances.
|
Made of Stainless Steel 304. No splashing, no sucking air, and fast mixing cuts time up to 90%. Operated within 450-700 rpms will give the best rate of thorough mixing. Great for glazes, slips, plaster, and many other substances. 3x3x31
|
Made of Stainless Steel 304. No splashing, no sucking air, and fast mixing cuts time up to 90%. Operated within 450-700 rpms will give the best rate of thorough mixing. Great for glazes, slips, plaster, and many other substances. 6x6x22
|
Made of Stainless Steel 304. No splashing, no sucking air, and fast mixing cuts time up to 90%. Operated within 450-700 rpms will give the best rate of thorough mixing. Great for glazes, slips, plaster, and many other substances.
|
Made of Stainless Steel 304. No splashing, no sucking air, and fast mixing cuts time up to 90%. Operates with 450-700 rpms which give the best rate of thorough mixing. Great for glazes, slips, plaster, and many other substances.
|
Mixes glazes, slips, and plaster to a smooth, lump free consistency... without screening! For mixing a quart container size, shaft length of 8", shaft diameter 1/4", and the coil length is 1.75".
|
Mixes glazes, slips, and plaster to a smooth, lump free consistency... without screening! For mixing a 1/2 gallon container size, shaft length of 12", shaft diameter 1/4", and the coil length is 2.5".
|
Mixes glazes, slips, and plaster to a smooth, lump free consistency... without screen! For mixing a 3 to 10 gallon container size, shaft length of 24", shaft diameter 3/8", and the coil length is 5".
|
|
|