|
|
Burner Accessories
Products In This Category
1/2" x 1/4" Hose Bushing (red).
|
Burner accessory. Hose fit connector. 9/16 18 LH x 1/4 MNPT.
|
Orifice replacement for Laguna and Venturi burners for natural gas. ~1/8" aperture.
|
Orifice replacement for Laguna and Venturi burners for propane. ~1/16" aperture.
|
Use to control a fuel's flow with the turn of a handle. Inner thread measures 1/4". Brass body, 600 WOG rated.
|
Use to control a fuel's flow with the turn of a handle. Inner thread measures 1/2". Brass body, 600 WOG rated.
|
Use to control a fuel's flow with the turn of a handle. Inner thread measures 3/4". Brass body, 600 WOG rated.
|
Use to control and regulate a fuel's flow.
|
Use to control and regulate a fuel's flow.
|
Use to control and regulate a fuel's flow.
|
Use to control and regulate a fuel's flow.
|
Use to connect a fuel source to a kiln.
|
Use to measure the air pressure of a regulated fuel. Note: Has 1/4" MPT with a bottom inlet.
|
Invaluable for trying to establish a kiln firing schedule. It measures the gas pressure to the burners as an indication of how much gas is entering the kiln. Reads gas pressure on a calibrated scale of 0-15" of water column pressure.
|
Invaluable for trying to establish a kiln firing schedule. It measures the gas pressure to the burners as an indication of how much gas is entering the kiln. Reads gas pressure on a calibrated scale of 0-30" of water column pressure.
|
Can regulate air or liquid; this direct-operated regulator is designed for high-pressure service and can be used on either air or liquid gas applications. Recommended for a small gas or Raku kiln. Reads 3-35 psi with gauge, 750,000 BTU/h. 1/4 thread.
|
|
|