Product Categories
Clays...
  Earthenware
  Mid-Range - Stoneware/Porcelain
  Highfire - Stoneware/Porcelain
  Slip
  Paper Clay
  Air Dry Clay
  Colored Porcelain
Glazes...
  Laguna Prepared Glaze
  Laguna Underglazes
  Laguna Dry Glaze
  Overglaze Pens
  Underglaze Pens
  Underglaze Pencils
  AMACO Velvets
  Spectrum Glaze
  Opulence Glaze
  Stains
  Metallic Lusters
Slips...
  Porcelain Slip
  Earthenware Low Fire Slip
  Stoneware Slip
  Slip Tools
Raw Materials...
  Oxides, Stains and Dyes
  Liquid Materials
  Dry Raw Materials
  Material Storage Solutions
Plaster and Mold Making...
  Pottery Plaster
  Body Molding Kits
  Mold Release Materials
  Liquid Latex
  Alginate
  Plaster Bandages
Equipment...
Pugmills, Clay Mixers
Potter's Wheels...
  Electric Potters Wheels
  Table Top Potters Wheels
  Potters Kickwheels
Potters Wheel by Brand...
  Axner Potters Wheels
  Pacifica Potters Wheels
  Brent Potters Wheels
  Lockerbie Pottery Kick Wheels
  Laguna Pottery Kick Wheels
  Shimpo Potters Wheels
  Skutt/Thomas Stuart Potters Wheels
  Soldner Potters Wheels
  Speedball CI Potters Wheels
  Bats, Bat Sheets
  Wheel accessories
  Brand specific wheel accessories
Ceramic Studio Furniture...
  Ware Carts and Accessories
  Work Tables
  Glaze Formulation Tables
  Damp and Drying cabinets
Sink Traps
Extruders
Slab Rollers...
  Portable Slab Roller
  Full Size Slab Rollers
Tile Cutters
Slip Equipment...
  Slip Casters
  Slip Mixers
  Slip Reclaimers
Ball Mills...
  Ball Mill Jars and Balls
Hand and Drill Mixers
Sieves and Strainers
Spray Booths...
  Motors
  Filters
Air Brush Equipment...
  Spray Guns and Parts
  Compressors
  Regulators and Hoses
Studio Storage...
  Dry Storage Jars
  Wet Storage Jars
  Glaze Formulation Tables
Measuring Equipment...
  Scales
  Hydrometers
  Viscometers
  Sieves
Safety Gear
Kilns by brand...
  Laguna Kilns
  Evenheat
  L&L
  Olympic
  Paragon
  Skutt
Kilns by type...
  Electric Kilns
  Pottery Kilns
  Glass Kilns
  Gas Kilns
  Raku Kilns
Kiln Accessories and Supplies...
  Vents and Hoods
  Kiln Wash
  Pyrometric Cones
  Protective Gear
  Raku Tongs
Kiln Building and Repair...
  Burners
  Refractory Brick, Blanket
  Refractory Buttons
  Nichrome Wire
  Coatings
  Patch, Mender and Fix-It
Kiln Monitoring...
  Pyrometric Cones
  Kiln Controllers
  Oxygen probes
  Pyrometers & Thermocouples
Refractories...
  Kiln Shelves
  Kiln Posts
  Tile Racks
  Stilts and Speedy Spurs
  Buttons
  Nichrome Wire
Parts and Finishing...
  Bamboo Handles
  Clock Movements
  Fountain Parts
  Dispenser Parts
  Lotion Pumps
  Corks, Pour Spouts and Stoppers
  Rubber Plugs
  Magnets
  Lamp Kits & Oil Lamp Supplies
  Flower Frogs and Cups
  Plate Stands and Hangers
  Dishwasher Safe Labels
  Adhesive Pads
Bisque Tiles
Ceramic Canvas
Decals and Transfer Paper
Hand Salves and Creams
Tools & Brushes
Glass Fusing
Books
Videos
Magazines
Posters
Gift Certificates
Showroom Specials

Refractories & Firing

Displaying products 151 - 175 of 189 results
Page 7 of 8 Page moveprev1...45678movenext
Porcelain Prop
Porcelain Prop
A flexible ceramic fiber product. It may be used to support pieces in firing - simply pack the Porcelain Prop tightly under appendages or areas which may collapse or warp. Can be fired to Cone 10 and is re-usable. 12"x12"x1".
Axner Price: $3.50
Porcelain Prop
Superwool Fiber - 1
Superwool Fiber (HT) - 1" Thick, 24" wide (sold per sq. ft.) 8 lb. density [SHIPS UPS]

Superwool Blanket HT is made of long fibers, and is flexible, easy to cut and shape, and easy to install. Superwool has excellent thermal stability and retains its original soft fibrous structure up to classification temperature.
Axner Price: $3.00
Superwool Fiber (HT) - 1" Thick, 24" wide (sold per sq. ft.) 8 lb. density [SHIPS UPS]
Superwool Fiber - 2" Thick
Superwool Fiber (HT) - 2" Thick, 24" wide (sold per sq. ft.) 8 lb. density [SHIPS UPS]

Superwool 607 HT Blanket is made of long fibers, and is flexible, easy to cut and shape, and easy to install. Superwool has excellent thermal stability and retains its original soft fibrous structure up to classification temperature.
Axner Price: $6.00
Superwool Fiber (HT) - 2" Thick, 24" wide (sold per sq. ft.) 8 lb. density [SHIPS UPS]
Nichrome Wire 15 gauge (sold per ft.)

A flexible wire capable of use up to Cone 5 (2250°F). In short lengths, it can be suspended between two kiln posts or refractory bricks to support beads or jewelry in firing.
15 gauge (3/64" diameter). Sold by the foot.
Axner Price: $1.65
Nichrome Wire 15 gauge (sold per ft.)
Nichrome Wire 9 gauge (sold per ft.)

A flexible wire capable of use up to Cone 5 (2250°F). In short lengths, it can be suspended between two kiln posts or refractory bricks to support beads or jewelry in firing.
9 gauge (3/32" diameter). Sold by the foot.
Axner Price: $3.90
Nichrome Wire 9 gauge (sold per ft.)
Ceramic Fiber Washer
Ceramic Fiber Washer

A 2" diameter Ceramic Washer used to secure Ceramic Fiber to an outer frame. For use with nichrome tie wire. Works well with 15 gauge Nichrome wire (pictured, but not included). Can be fired up to Cone 12.
Axner Price: $1.25
Ceramic Fiber Washer
Skutt EnviroVent 2 Dual Intake Kit
EnviroVent 2 Dual Vent Kit
Vent Two Kilns with One Vent Motor; the EnviroVent 2 has the capability of venting 2 large kilns (up to 12 cu/ft chambers) with this optional Dual Intake Kit. The kit is easy to install and comes with the ducting Y, additional ducting and collection cup.
Axner Price: $160.00
EnviroVent 2 Dual Vent Kit
Skutt EnviroVent 2
EnviroVent 2 Ventilation System
With Downdraft Venting, the kiln is kept under negative pressure. Gases are mixed with fresh room air, pulled out of the kiln near the bottom and exhausted to the outside through a duct.
Axner Price: From $408.00 to $660.00
EnviroVent 2 Ventilation System
Orton Ventmaster
Orton VentMaster [SHIPS MFG]
With Downdraft Venting, the kiln is kept under a slight negative pressure. Gases are pulled out of the kiln near the bottom, mixed with fresh room air and exhausted to the outside through a duct.
Axner Price: From $455.00 to $465.00
Orton VentMaster [SHIPS MFG]
Orton VentMaster Expansion Kit
Orton VentMaster Expansion Kit [SHIPS MFG]
VentMaster Expansion Kit allows you to add another kiln at a fraction of the cost of a new vent. Accessory for the Orton Ventmaster.
Axner Price: $172.00
Orton VentMaster Expansion Kit [SHIPS MFG]
Orton VentMaster Hose Kit
Orton VentMaster Hose Kit [SHIPS MFG]
VentMaster Hose Kit extends the distance between the blower motor and the collector cup. Accessory for the Orton Ventmaster.
Axner Price: $35.00
Orton VentMaster Hose Kit [SHIPS MFG]
Vent-A-Kiln 1227 Hood
Vent-A-Kiln 1227 Hood (Aluminum) [SHIPS MFG]
Vent-A-Kiln Hoods hang 2" above kiln, never coming in contact with the kiln, therefore no motor vibrations will disturb your kiln. This model fits round kilns with a diameter of 19" to 23".
List Price: $500.00
Axner Price: $440.00
You Save: $60.00 (12 %)
Vent-A-Kiln 1227 Hood (Aluminum) [SHIPS MFG]
Vent-A-Kiln 1332 Hood
Vent-A-Kiln 1332 Hood (Aluminum) [SHIPS MFG]
Vent-A-Kiln Hoods hang 2" above kiln, never coming in contact with the kiln, therefore no motor vibrations will disturb your kiln. This model fits round kilns with a diameter of 24" to 28".
List Price: $525.00
Axner Price: $462.00
You Save: $63.00 (12 %)
Vent-A-Kiln 1332 Hood (Aluminum) [SHIPS MFG]
Vent-A-Kiln 1437 Hood
Vent-A-Kiln 1437 Hood (Aluminum) [SHIPS MFG]
Vent-A-Kiln Hoods hang 2" above kiln, never coming in contact with the kiln, therefore no motor vibrations will disturb your kiln. This model fits round kilns with a diameter of 29" to 33".
List Price: $550.00
Axner Price: $484.00
You Save: $66.00 (12 %)
Vent-A-Kiln 1437 Hood (Aluminum) [SHIPS MFG]
Vent-A-Kiln 1544 Hood
Vent-A-Kiln 1544 Hood (Aluminum) [SHIPS MFG]
Vent-A-Kiln Hoods hang 2" above kiln, never coming in contact with the kiln, therefore no motor vibrations will disturb your kiln. This model fits round kilns with a diameter of 34" to 40".
List Price: $710.00
Axner Price: $625.00
You Save: $85.00 (12 %)
Vent-A-Kiln 1544 Hood (Aluminum) [SHIPS MFG]
Vent-A-Kiln 1654 Hood (Aluminum)
Vent-A-Kiln 1654 Hood (Aluminum) [SHIPS MFG]
Vent-A-Kiln Hoods hang 2" above kiln, never coming in contact with the kiln, therefore no motor vibrations will disturb your kiln. This model fits round kilns with a diameter of 41" to 50".
List Price: $962.00
Axner Price: $847.00
You Save: $115.00 (12 %)
Vent-A-Kiln 1654 Hood (Aluminum) [SHIPS MFG]
Programmable Mini-Time Controller for Vent-A-Kiln Hoods
Programmable Mini-Time Controller for Vent-A-Kiln Hoods [SHIPS MFG]
Convenient easy-to-use device programs your kiln vent to run on automatic settings.
Axner Price: $85.00
Programmable Mini-Time Controller for Vent-A-Kiln Hoods [SHIPS MFG]
Safety Screen
Safety Screen for Kiln firinig [SHIPS MFG]
Three 2 ft. x 3 ft. flame-retardant canvas screens make up this free standing Safety Screen used to alert co-workers, students or others of a kiln in operation.
Axner Price: $156.00
Safety Screen for Kiln firinig [SHIPS MFG]
High Temp Kiln Wash - Lee's by Axner
A high temperature protective coating for kiln shelves and other areas inside the kiln that may be subjected to dripping glaze during firing.
Axner Price: From $7.95 to $39.95
High Temp Kiln Wash - Lee's by Axner
Laguna Standard Kiln Wash, Low Fire
Laguna Kiln Wash, Low Fire Standard (Dry, sold per lb.)

A protective coating for kiln shelves and other areas inside the kiln that may be subjected to dripping glaze during firing.
Axner Price: $1.70
Laguna Kiln Wash, Low Fire Standard (Dry, sold per lb.)
Laguna Kiln Wash, High Temp Super Duty
Laguna Kiln Wash, High Temp Super Duty (Dry, sold per lb.)

A protective coating for kiln shelves and other areas inside the kiln that may be subjected to dripping glaze during firing.
Axner Price: $2.30
Laguna Kiln Wash, High Temp Super Duty (Dry, sold per lb.)
Laguna Kiln Wash, High Temp Super Duty
Smoothset Mortar (Dry, sold per lb.)

Use with firebrick and insulating firebrick. Air setting. Maximum service temperature 2900°F.
Axner Price: $2.53
Smoothset Mortar (Dry, sold per lb.)
Axner Fireball Oxyprobe
Axner Fireball Oxyprobe
The Fireball Oxyprobe is a precision instrument designed to improve the firings in fuel-fired kilns.
Axner Price: $835.00
Axner Fireball Oxyprobe
Analogue Pyrometer
Analogue Pyrometer
Analogue pyrometer to assist in reading the interior temperature of your kiln; reads up to 2500°F. Meter marked so you can make both Centigrade or Fahrenheit readings.
Axner Price: $69.95
Analogue Pyrometer
Data Logger Pyrometer
Data Logger Pyrometer [SHIPS FL] [While Supply Lasts]
Pyrometer with data logging capabilities to assist in reading the interior temperature of your kiln; reads up to 2500°F. Displays Temperature, Rate of Temperature Rise and elapsed data collection time. Includes 6 ft of wire.
Axner Price: $149.95
Data Logger Pyrometer [SHIPS FL] [While Supply Lasts]
Page 7 of 8 Page moveprev1...45678movenext