Product Categories
Clays...
  Earthenware
  Mid-Range - Stoneware/Porcelain
  Highfire - Stoneware/Porcelain
  Slip
  Paper Clay
  Air Dry Clay
  Colored Porcelain
Glazes...
  Laguna Prepared Glaze
  Laguna Underglazes
  Laguna Dry Glaze
  Overglaze Pens
  Underglaze Pens
  Underglaze Pencils
  AMACO Velvets
  Spectrum Glaze
  Opulence Glaze
  Stains
  Metallic Lusters
Slips...
  Porcelain Slip
  Earthenware Low Fire Slip
  Stoneware Slip
  Slip Tools
Raw Materials...
  Oxides, Stains and Dyes
  Liquid Materials
  Dry Raw Materials
  Material Storage Solutions
Plaster and Mold Making...
  Pottery Plaster
  Body Molding Kits
  Mold Release Materials
  Liquid Latex
  Alginate
  Plaster Bandages
Equipment...
Pugmills, Clay Mixers
Potter's Wheels...
  Electric Potters Wheels
  Table Top Potters Wheels
  Potters Kickwheels
Potters Wheel by Brand...
  Axner Potters Wheels
  Pacifica Potters Wheels
  Brent Potters Wheels
  Lockerbie Pottery Kick Wheels
  Laguna Pottery Kick Wheels
  Shimpo Potters Wheels
  Skutt/Thomas Stuart Potters Wheels
  Soldner Potters Wheels
  Speedball CI Potters Wheels
  Bats, Bat Sheets
  Wheel accessories
  Brand specific wheel accessories
Ceramic Studio Furniture...
  Ware Carts and Accessories
  Work Tables
  Glaze Formulation Tables
  Damp and Drying cabinets
Sink Traps
Extruders
Slab Rollers...
  Portable Slab Roller
  Full Size Slab Rollers
Tile Cutters
Slip Equipment...
  Slip Casters
  Slip Mixers
  Slip Reclaimers
Ball Mills...
  Ball Mill Jars and Balls
Hand and Drill Mixers
Sieves and Strainers
Spray Booths...
  Motors
  Filters
Air Brush Equipment...
  Spray Guns and Parts
  Compressors
  Regulators and Hoses
Studio Storage...
  Dry Storage Jars
  Wet Storage Jars
  Glaze Formulation Tables
Measuring Equipment...
  Scales
  Hydrometers
  Viscometers
  Sieves
Safety Gear
Kilns by brand...
  Laguna Kilns
  Evenheat
  L&L
  Olympic
  Paragon
  Skutt
Kilns by type...
  Electric Kilns
  Pottery Kilns
  Glass Kilns
  Gas Kilns
  Raku Kilns
Kiln Accessories and Supplies...
  Vents and Hoods
  Kiln Wash
  Pyrometric Cones
  Protective Gear
  Raku Tongs
Kiln Building and Repair...
  Burners
  Refractory Brick, Blanket
  Refractory Buttons
  Nichrome Wire
  Coatings
  Patch, Mender and Fix-It
Kiln Monitoring...
  Pyrometric Cones
  Kiln Controllers
  Oxygen probes
  Pyrometers & Thermocouples
Refractories...
  Kiln Shelves
  Kiln Posts
  Tile Racks
  Stilts and Speedy Spurs
  Buttons
  Nichrome Wire
Parts and Finishing...
  Bamboo Handles
  Clock Movements
  Fountain Parts
  Dispenser Parts
  Lotion Pumps
  Corks, Pour Spouts and Stoppers
  Rubber Plugs
  Magnets
  Lamp Kits & Oil Lamp Supplies
  Flower Frogs and Cups
  Plate Stands and Hangers
  Dishwasher Safe Labels
  Adhesive Pads
Bisque Tiles
Ceramic Canvas
Decals and Transfer Paper
Hand Salves and Creams
Tools & Brushes
Glass Fusing
Books
Videos
Magazines
Posters
Gift Certificates
Showroom Specials

Peter Pugger VPM-60 De-airing Power Wedger Pugger-Mixer

Manufacturer: Peter Pugger
Weight: 520 lbs., 0.00000 oz.


Axner Price: From $8,131.00 to $8,293.00


Ready to buy?
This product has options or additional charges that may alter its price. Click here or scroll down for more details.
 

Product Options

Variable Speed Controller:
Select the options you want from the choices listed. Additional charges will reflect in the Axner Price listed above. When you're done customizing this product, click the Add to Cart button to place this item in your shopping cart.
 
Product Details
Model Motor Mixing Capacity* Pugging Capacity* Weight
Peter Pugger VPM-60 De-Airing Power Wedger 2.0 HP 500 lbs/hr 1,500 lbs/hr 520 lbs.

A complete clay processing machine.

Save your body and time for productive work and let the "tireless assistant" do the complete job of clay production and recycling. Capable of batch mixing any combination of wet, dry, greenware, slip, slop, powder and scrap. Recycle without slaking, wedging, or constant force feeding.

Robust construction combined with innovative design makes the Pugger-Mixer the most capable studio processor available today. The Pugger-Mixer frees the operator during the mixing process, vacuum de-airs the whole batch and then empties itself in the form of compacted logs -- ready for throwing.

Note: May take 4-6 weeks for delivery. May require additional shipping fees. Peter Pugger Pugger-Mixer price is FOB our warehouses.

Peter Pugger De-Airing Power Wedger VPM-60 Specifications:
  • Max Batch Capacity: 140 lbs
  • Mixing Rate*: 500 lbs/hr
  • Pugging Rate*: 1,500 lbs/hr
  • Dimensions: 58"L x 24"W x 31"H
  • Pug Diameter: 3.5"
  • Hopper Door: 9" x 9"
  • 1/2 hp Vacuum Pump: 3.8 amps at 120V
  • 2.0 hp Motor, Single Phase: 12 amps at 240V (Three Phase, 50 hz and other motors available)
  • Optional Equipment: Variable Speed Control
*Capacities vary depending on clay conditions, type, moisture, etc.
**Note: For large or heavy orders that weigh 150 lbs. or more, we will advise you of the approximate freight cost. You will not be charged until we verify shipping costs with you.**

Features of Peter Pugger Pugger-Mixers:

Batch Mixing
Full batch mixing and blending capability allows for thorough mixing and moisture adjustment before pugging.

Push Button Controls (VPM-60, PM-50, and PM-100 only)
The MIX/PUG/STOP buttons are mounted forward so the can be reached from the operator's side of the machine during loading and extruding.

High Quality, Heavy Duty Drive
The industrial rated electric motor, close coupled to a gear reduction transmission, is the highest quality available. Overload protection is provided in the magnetic motor starter.

On Wheels (VPM-60, PM-50, and PM-100 only)
The Pugger-Mixer comes with 8" diameter wheels and front casters. It is easily transported for cleaning or storage.

Sealed Chamber
Moist clay can be stored indefinitely since all openings are sealed.

Large Hopper
The oversized hopper door allows for easy loading of large chunks, scraps or dry powder.

Pug Mill Output
Switch to PUG after a batch is completely mixed and the Pugger-Mixer unloads itself in the form of compacted logs.

Stainless Steel
Augers, shaft and paddles of stainless steel, along with aluminum mixing and pugging chambers ensure clay processing without iron contamination.

Work Surface
The motor, gear drive and vacuum pump are enclosed for protection and cleanliness. This creates a durable work surface for operator convenience while loading and unloading.

Vacuum De-Aired
Entire batch can be thoroughly de-aired by starting the vacuum pump when the load is being mixed. Air is removed during the last stage of mixing, leaving an air-free, high quality product when pugged.

Variable Speed Option
Allows the operator to control the speed of the motor, thus the speed of the extrusion. This control is especially useful when extruding small objects through dies attached to the nozzle.
  Safety
It is not necessary to continuously hand-feed the Pugger-Mixer as with standard pug mills. Load a full batch, close the lid and turn it on -- this eliminates exposure to moving paddles. The machine shuts off automatically when the lid is opened.

Capabilities
The Pugger-Mixer is the most versatile studio clay processing machine on the market today. It can perform a variety of functions efficiently, transforming clay in any form to a usable product. Some examples:
  • Mix moist clay from powder and water
  • Reclaim scrap - wet or dry
  • Blend two or more different bodies
  • Add materials (wet or dry) to an already moist body
  • Adjust moisture of an already wet body
  • Or just "wedge" a block of clay - literally warm the clay by mixing it
Vacuum Pump (VPM series only)
Vacuum is provided by a 1/2 HP double-headed rocking piston-type diaphragm pump. These new technology pumps are the simplest and quietest vacuum sources available. They are maintenance-free and long lasting. The Pugger-Mixer does not require a large vacuum pump because the clay is continuously exposed to vacuum in the sealed mixing chamber (no vacuum screens required). Once the clay chamber is evacuated, the vacuum can be turned off. No extrusion screens to plug, clean or slow down cycle times.

Cleaning
The nozzle, intermediate cone, as well as the auger and mixing paddles, are removable so they can be conveniently washed off. With the mixing paddles removed, the mixing chamber is easily accessed for cleaning. Cleaning is necessary only to avoid cross contamination. Since the machines are completely sealed, moist clay can be stored indefinitely without drying out.

Guarantee
Two year coverage on the whole machine; return the broken part, it will be replaced or repaired* (owner pays shipping one way only). Thereafter drive parts can be obtained through local hardware sources as all drive parts are standard components.

*If, in the manufacturer's sole opinion, failure is due to mistreatment or lack of reasonable maintenance, nominal charge may be made. Motor and transmission manufacturer's usual warranty applies to those parts.


<< Previous in Equipment Next in Equipment >>


Product Reviews

(0 Ratings, 0 Reviews)