Product Categories
Clays...
  Earthenware
  Mid-Range - Stoneware/Porcelain
  Highfire - Stoneware/Porcelain
  Slip
  Paper Clay
  Air Dry Clay
  Colored Porcelain
Glazes...
  Laguna Prepared Glaze
  Laguna Underglazes
  Laguna Dry Glaze
  Overglaze Pens
  Underglaze Pens
  Underglaze Pencils
  AMACO Velvets
  Spectrum Glaze
  Opulence Glaze
  Stains
  Metallic Lusters
Slips...
  Porcelain Slip
  Earthenware Low Fire Slip
  Stoneware Slip
  Slip Tools
Raw Materials...
  Oxides, Stains and Dyes
  Liquid Materials
  Dry Raw Materials
  Material Storage Solutions
Plaster and Mold Making...
  Pottery Plaster
  Body Molding Kits
  Mold Release Materials
  Liquid Latex
  Alginate
  Plaster Bandages
Equipment...
Pugmills, Clay Mixers
Potter's Wheels...
  Electric Potters Wheels
  Table Top Potters Wheels
  Potters Kickwheels
Potters Wheel by Brand...
  Axner Potters Wheels
  Pacifica Potters Wheels
  Brent Potters Wheels
  Lockerbie Pottery Kick Wheels
  Laguna Pottery Kick Wheels
  Shimpo Potters Wheels
  Skutt/Thomas Stuart Potters Wheels
  Soldner Potters Wheels
  Speedball CI Potters Wheels
  Bats, Bat Sheets
  Wheel accessories
  Brand specific wheel accessories
Ceramic Studio Furniture...
  Ware Carts and Accessories
  Work Tables
  Glaze Formulation Tables
  Damp and Drying cabinets
Sink Traps
Extruders
Slab Rollers...
  Portable Slab Roller
  Full Size Slab Rollers
Tile Cutters
Slip Equipment...
  Slip Casters
  Slip Mixers
  Slip Reclaimers
Ball Mills...
  Ball Mill Jars and Balls
Hand and Drill Mixers
Sieves and Strainers
Spray Booths...
  Motors
  Filters
Air Brush Equipment...
  Spray Guns and Parts
  Compressors
  Regulators and Hoses
Studio Storage...
  Dry Storage Jars
  Wet Storage Jars
  Glaze Formulation Tables
Measuring Equipment...
  Scales
  Hydrometers
  Viscometers
  Sieves
Safety Gear
Kilns by brand...
  Laguna Kilns
  Evenheat
  L&L
  Olympic
  Paragon
  Skutt
Kilns by type...
  Electric Kilns
  Pottery Kilns
  Glass Kilns
  Gas Kilns
  Raku Kilns
Kiln Accessories and Supplies...
  Vents and Hoods
  Kiln Wash
  Pyrometric Cones
  Protective Gear
  Raku Tongs
Kiln Building and Repair...
  Burners
  Refractory Brick, Blanket
  Refractory Buttons
  Nichrome Wire
  Coatings
  Patch, Mender and Fix-It
Kiln Monitoring...
  Pyrometric Cones
  Kiln Controllers
  Oxygen probes
  Pyrometers & Thermocouples
Refractories...
  Kiln Shelves
  Kiln Posts
  Tile Racks
  Stilts and Speedy Spurs
  Buttons
  Nichrome Wire
Parts and Finishing...
  Bamboo Handles
  Clock Movements
  Fountain Parts
  Dispenser Parts
  Lotion Pumps
  Corks, Pour Spouts and Stoppers
  Rubber Plugs
  Magnets
  Lamp Kits & Oil Lamp Supplies
  Flower Frogs and Cups
  Plate Stands and Hangers
  Dishwasher Safe Labels
  Adhesive Pads
Bisque Tiles
Ceramic Canvas
Decals and Transfer Paper
Hand Salves and Creams
Tools & Brushes
Glass Fusing
Books
Videos
Magazines
Posters
Gift Certificates
Showroom Specials
Nitride-Bonded Shelf - 18"x18"x0.394" Square

Nitride-Bonded Shelf - 18"x18"x0.394" Square

Manufacturer: Other
Axner Number: RF328
Weight: 11 lbs., 6.40000 oz.


Axner Price: $91.00


Ready to buy?
This product has options or additional charges that may alter its price. Click here or scroll down for more details.
 

Product Options

* denotes required field

*
Select the options you want from the choices listed. Additional charges will reflect in the Axner Price listed above. When you're done customizing this product, click the Add to Cart button to place this item in your shopping cart.
 
 

Quantity Discounts

QuantityAmount
10 to 24$81.90
25 or more$72.80
First select the quantity you want to order of this product. Click the Add to Cart button to place this item in your shopping cart.

Note: Discounts from price breaks will not dynamically display on this page. You will see your quantity discount reflected in the shopping cart.
 
Product Details
Nitride-Bonded Rectangular Shelves stacked with kiln postsA 18"x18" square shelf designed for rectangular kilns. Measures approximately 0.394" thick.

Shipping Weight: 11.4 lbs.

Our Nitride-Bonded Silicon Carbide Shelves are very thin (as thin as 0.394-inches thick), light-weight, and contain low thermal mass. This means giant savings on your back. That could pay for this investment right away. It also means that your kiln has more room for pottery rather than for the kiln shelves.

Nitride-bonded shelves are much stronger than ordinary silicon carbide shelves and they are much, much stronger than high alumina or other cordierite shelves.

Nitride-bonded shelves are highly resistant to warping. They are rated for temperatures much higher than regular silicon carbide shelves. And their strength lends them to having a much longer working life than other kiln shelves.

The larger shelves have expansion joints, which enhance their long life. The expansion joints relieve stress on the shelf during the expansion and contraction that takes place during firing and helps protect against cracking. Even without the expansion joints, Nitride Bonded Silicon Carbide Shelves outlast most other types of kiln shelves, but this improves them further.

Note: Additional 5% Packing Fee for shelves shipped by freight carriers or a 20% Packing Fee for shelves shipped by "UPS"; $25 minimum charge on crating. Please also note that this fee will NOT show in the cart and will be added when we process your order.

"UPS"
refers to any common carrier, USPS, FedEx, UPS, etc. as explained in our Shipping Policies.

Caution: Because of the wide variety of applications that kiln shelves are subject to, neither the manufacturer nor Laguna Clay Company are able to guarantee their performance to the purchaser. The purchaser must inspect all kiln shelves for defects in material or workmanship upon receiving, as claims after that date will not be accepted.


Important Warnings
(read before using your new shelves)
WARNING! All silicon carbide shelves conduct electricity. When using these shelves in an electric kiln, avoid a serious electrical shock by following these guidelines:
  • WARNING! Never insert or remove the shelves into an electric kiln when the kiln is in the ON position. All it takes is the shelf touching an element to cause an electrical shock.
  • WARNING! Never load, unload or put your hands in the kiln when it is in the ON position.
  • WARNING! Always repair loose elements so that they don't hang out of their slots allowing them to touch the silicon carbide shelves creating a "shocking environment!"
  • WARNING! Although we are not aware of specific deteriorating, fracturing or exploding problems with our nitride bonded shelves, some other types of silicon carbide shelves have been known to explode when fired wet. To avoid such potential problems, don't allow your shelves to get wet!
Important Owner Information
(read before using your new shelves)
Clean your new shelves thoroughly upon receiving them. Silicon carbide has a tendency to abrade slightly during shipping causing a fine, silicon carbide grit to form on the surface, edges and in the expansion slits (not present on all shelves). Wipe off the shelves and slide a thin blade though the expansion slits to remove any particles and avoid "grit contamination" during firing.

Some shelf sizes include expansion slits that help reduce breakage from thermal shock.

The film of "white powder" on your shelves emerged from the silicon carbide material during the refractory firing. It will have no negative effect on your use of the shelves.

During your first firing, you may experience a dark blotching or discoloration on both the surface of the shelves and the ware with which they come in contact. This results from a lack of oxygen in the firing environment. Conducting a pre-firing (without ware) in a full oxidation atmosphere can significantly reduce this discoloration.

Just as with other silicon carbide shelves, your new nitride bonded shelves may be somewhat more prone to crack under severe thermal abuse than typical clay shelves. If you are new to silicon carbide shelves, or if your firings include exceptionally rapid cool-down or other harsh treatment, you may want to check with your dealer to determine steps you might take to prevent potential damage.

Posting your shelves. Because of the lightweight, thin design of your nitride-bonded shelves, using three posts is not only the most efficient but also the most effective way to load your kiln. Three posts versus four helps negate any unevenness in the kilns floor and, more likely, in the posts themselves. It doesn't matter how strong the shelf, four uneven posts under one shelf will most surely result in a broken shelf – sooner or later!

Note: It is difficult to make Nitride Bonded Kiln Shelves that are 100% flat. Our Affordable Nitride Bonded Silicon Carbide Kiln Shelves are close and they are extremely resistant to further warping. Our standard is that they not be off by more than one half of one percent from the furthest length of the shelf (diagonal on rectangular shelves).

For additional information contact Laguna Clay Co. at (626) 330-0631 or or Axner Pottery Supply at (800) 843-7057.


<< Previous in Refractories & Firing Next in Refractories & Firing >>


Product Reviews

(0 Ratings, 0 Reviews)