|
|
|
|
All the basic pottery tools required for the professional as well as the beginner. Contains one each: Loop Tool (LT5), Ribbon Tool (8R2), Potter's Rib (RB2), Needle Tool (PRO), Wood Modeling Tool (WT6), Sponge Scraper (S4), Wire Clay Cutter (K35).
|
|
|
|
|
|
|
|
|
|
Used by potters and sculptors for medium duty clay cutting, shaping, and slicing; the cutting ends are formed from high-strength sharpened stainless steel that are firmly attached to hardwood handles. Ribbon tools are approximately 8" long.
|
|
|
|
|
|
|
|
|
|
This set may be just what you're looking for if you're looking to do any fine sculpting, detailing, or trimming. Made of fine ribbon steel, heat treated for maximum strength and firmly set into a 0.25" aluminum handle.
|
|
|
|
|
|
|
|
|
|
Useful for trimming, carving and sculpting tasks. This knife has a softer steel blade than the F97, with much more flexibility which allows it to bend. Approximately 8" long.
|
|
|
|
|
|
|
|
|
|
Useful for trimming, carving and sculpting tasks. This knife has a harder tempered steel blade than the F96, with the same "spring" feel as most conventional blades. Approximately 8" long.
|
|
|
|
|
|
|
|
|
|
Used to trim away the excess clay (spare or waste) from slip cast molds; this all hardwood knife has proven to minimize to minimize damage to the mold. Approximately 8" long.
|
|
|
|
|
|
|
|
|
|
Used for mixing and applications of paint or stain mediums. Approximately 6" long.
|
|
|
|
|
|
|
|
|
Spend less time sharpening and more time working on highly abrasive clay products. The "file hard" heavy steel blade is firmly set in a hardwood handle and capable of extended usage on highly abrasive clay without sharpening. Approximately 7" long.
|
|
|
|
|
|
|
|
|
|
This lightweight and easy to handle caliper can transfer measurements from a model to clay for both interior and exterior dimensions. Made from a tough aluminum alloy, and assembled with rust-free hardware. Approximately 8" long.
|
|
|
|
|
|
|
|
|
|
This lightweight and easy to handle caliper can transfer measurements from a model to clay for both interior and exterior dimensions. Made from a tough aluminum alloy, and assembled with rust-free hardware. Approximately 10" long.
|
|
|
|
|
|
|
|
|
|
This lightweight and easy to handle caliper can transfer measurements from a model to clay for both interior and exterior dimensions. Made from a tough aluminum alloy, and assembled with rust-free hardware. Approximately 12" long.
|
|
|
|
|
|
|
|
|
Use this tool to transfer measurements from a model to the clay and measure thickness and diameters. Made from imported hardwood with rust-free hardware that is easily adjusted by hand. Approximately 10" long.
Axner Price: $8.69
|
|
|
|
|
|
|
|
For dipping bisque ceramic pieces directly into a glaze. The four sharp gripping points on this tool make minimal contact with the piece being dipped. Approximately 12" long.
|
|
|
|
|
|
|
|
|
|
Ideal for slicing and cutting lump clay, as well as trimming pots and other projects on the wheel or from bats. 3" hardwood toggle handles are firmly fastened to approximately 18" of stainless steel wire.
|
|
|
|
|
|
|
|
|
|
Ideal for slicing and cutting lump clay, as well as trimming pots and other projects on the wheel or from bats. 3" hardwood toggle handles are firmly fastened to approximately 18" of high strength braided nylon cord.
|
|
|
|
|
|
|
|
|
|
Get way down inside a piece without marking up the walls. The special hardware attaching the sponge protects your piece and can easily hold your favorite sponge in place. Made from hardwood and 14" in length.
|
|
|
|
|
|
|
|
|
|
Patterned from the Japanese egote, this tool aids shaping and compressing deep, narrow necked wheel thrown pieces. Made of fine hardwood that is polished to a satin finish, this "comfortably fitting" throwing stick is 12-1/2" in length.
|
|
|
|
|
|
|
|
|
|
Patterned from the Japanese egote, this tool aids shaping and compressing deep, narrow necked wheel thrown pieces. Made of fine hardwood that is polished to a satin finish, this "comfortably fitting" throwing stick is 12-1/2" in length.
|
|
|
|
|
|
|
|
|
|
Handheld detail extrusion tool. With this you can force soft clay through various shaped openings in an assortment of 19 interchangeable discs. The barrel is 0.7 inch diameter and 3.5" long.
|
|
|
|
|
|
|
|
|
|
Set of 19 interchangeable replacement discs for the Kemper K45 Klay Gun handheld detail extrusion tool.
|
|
|
|
|
|
|
|
|
|
This extruder has a 20" long barrel with a diameter or 2", fast action trigger, easy loading, and includes 4 disks. Includes instructions.
|
|
|
|
|
|
|
|
|
|
Blank die disks for the Kemper Industrial Klay Extruder Gun (IKEG) - comes with 3 blank disks. Custom drill your own shape. You can use a regular drill tool on these aluminum disks.
|
|
|
|
|
|
|
|
|
|
Round die disks for the Kemper Industrial Klay Extruder Gun (IKEG) - comes with 3 round disks, 1/2", 1/4", 3/8". Great for making coils.
|
|
|
|
|
|
|
|
|
|
Ribbon die disks for the Kemper Industrial Klay Extruder Gun (IKEG) - comes with 2 ribbon disks.
|
|
|
|
|
|
|
|
|
|
Used to support beads, rings and many other small articles during kiln firing. Approximately 11" long, the Ceramic Bead Bars are designed with a special, high temperature alloy that retains strength up to Cone 10 temperatures.
|
|
|
|
|
|